87 found, showing page 3 of 6
Soap Nozzle, Black, 65 Degrees x 4.0 mm
Soap and chemical spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI.
View Details
$7.19
Quick Connect Nozzle Holder and Nozzles
4-pack stainless steel Quick Connect (QC) pressure washer spray nozzles with 4.5 mm orifices and rubber slip-on-lance nozzle holder. The spray nozzles are designed for a 1/4 inch (6.35 mm) QC coupler and are ideal for quick exchange of spray nozzles and spray guns. The set includes 00 blasting (red), 150 chiseling (yellow), 250 flushing (green) and 400 washing (white) QC spray nozzles plus a convenient slip-on-lance nozzle holder that holds all four spray nozzles. The slip-on-lance nozzle holder easily slides onto 1/4 inch (6.35 mm) diameter pressure washer lances.
SPECIFICATIONS
Fitting: Spray nozzles (4-pack) with slip-on-lance nozzle holder
Nozzle Material: Stainless steel
Nozzle #1: 00 blasting (red)
Nozzle #2: 150 chiseling (yellow)
Nozzle #3: 250 flushing (green)
Nozzle #4: 400 washing (white)
Nozzle Connections: 1/4 inch (6.35 mm) Quick Connect
Nozzle Orifice: 4.5 mm
Nozzle Maximum Temperature: 3000 F (148.90 C)
Nozzle Maximum Working Pressure: 4,000 PSI
Holder Material: Polymer
Holder Orifice: 1/4 inch (6.35 mm)
Holder Maximum Temperature: 1400 F (600 C)
View Details
$26.99
Quick Connect Chiseling Nozzle, 15 Degrees x 4.0 mm, Yellow
Stainless steel Chiseling (yellow color coded) pressure washer spray nozzle with 4.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Chiseling (yellow) QC spray nozzles have a 15 degree spray pattern for intense cleaning of unpainted hard surfaces such as grills, driveways, concrete or brick walkways, or unpainted brick or stucco. The spray gun should be directed at a 45 degree angle to the surface and be used like a scraper to remove paint, grease and dirt. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4.0mm orifices work best on pressure washers rated between 500 PSI with 1.4 GPM (low end) to 8,000 PSI with 5.7 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 15? soap
Color-Coding: Yellow
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 4.0 mm
Maximum Temperature: 300? F (148.9? C)
Maximum Working Pressure: 4,000 PSI
View Details
$6.06
Chiseling Nozzle, Yellow, 15 Degrees x 4.5 mm
Chiseling spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI.
View Details
$7.99
Chiseling Nozzle, Yellow, 15 Degrees x 5.5 mm
Chiseling spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI.
View Details
$8.49
Flushing Nozzle, Green, 25 Degrees x 4.5 mm
Flushing spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI
View Details
$7.99
Washing Nozzle, White, 40 Degrees x 4.5 mm
Washing spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI.
View Details
$7.99
Blasting Nozzle, Red, 0 Degrees x 4.5 mm
Blasting spray nozzle designed for a 1/4 inch (6.35 mm) quick coupler. 300? F (148.9? C). 4,000 PSI.
View Details
$7.99
High-Pressure Nozzle, 25 Degrees, 3.0 Orifice, Green
Stainless steel Flushing (green color coded) pressure washer spray nozzle with 3.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Flushing (green) QC spray nozzles have a 25 degree spray pattern for standard cleaning for most applications, including yard tools, sidewalks, lawn furniture, unpainted siding, stucco, gutters and eaves, concrete, and brick surfaces. Ideal for sweeping leaves from walks, curbs and driveways, cleaning stable floors, washing swimming pool bottoms, cleaning barbecue grills, etc. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 3.0mm orifices work best on pressure washers rated between 500 PSI with 1.1 GPM (low end) to 8,000 PSI with 4.2 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 25? (Flushing)
Color-Coding: Green
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 3.0 mm
Maximum Temperature: 293? F (145? C)
Maximum Working Pressure: 4,000 PSI
View Details
$7.69
High-Pressure Nozzle, 15 Degrees, 3.0 Orifice, Yellow
Stainless steel Chiseling (yellow color coded) pressure washer spray nozzle with 3.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Chiseling (yellow) QC spray nozzles have a 15 degree spray pattern for intense cleaning of unpainted hard surfaces such as grills, driveways, concrete or brick walkways, or unpainted brick or stucco. The spray gun should be directed at a 45 degree angle to the surface and be used like a scraper to remove paint, grease and dirt. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 3.0mm orifices work best on pressure washers rated between 500 PSI with 1.1 GPM (low end) to 8,000 PSI with 4.2 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 15? (Chiseling)
Color-Coding: Yellow
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 3.0 mm
Maximum Temperature: 300? F (148.9? C)
Maximum Working Pressure: 4,000 PSI
View Details
$7.69
Turbo Nozzle Rotating, 1/4 in FNPT x 4.5 mm
Increases cleaning efficiency by more than 200% over a 25? spray nozzle by using a 0? rotating tearing action. 212? F (100? C). 3,600 PSI.
View Details
$48.99
Turbo Nozzle, High-Pressure Rotating, 1/4 inch FNPT x 4.5 mm
Increases the cleaning efficiency by more than 200% over a 25? spray nozzle by using a 0? rotating tearing action. 212? F (100? C). 5,100 PSI.
View Details
$94.99
High-Pressure Nozzle, 0 Degrees, 3.0 Orifice, Red
Stainless steel Blasting (red color coded) pressure washer spray nozzle with 3.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Blasting (red) QC spray nozzles have a powerful 0 degree pinpoint spray pattern for spot cleaning of hard, unpainted surfaces such as metal and concrete, or for high reach areas. They are ideal for removing weeds from sidewalk cracks, stubborn mineral stains and chewing gum from concrete, masonry, aluminum and steel, caked mud from equipment and cleaning lawn mower undersides. DO NOT USE Blasting QC spray nozzles on wood. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used.
As a general rule, QC spray nozzles with 3.0mm orifices work best on pressure washers rated between 500 PSI with 1.1 GPM (low end) to 8,000 PSI with 4.2 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 0? (Blasting)
Color-Coding: Red
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 3.0 mm
Maximum Temperature: 300? F (148.9? C)
Maximum Working Pressure: 4,000 PSI
View Details
$7.69
Quick Connect Blasting Nozzle, Red, 0 Degrees x 4.0 mm
Stainless steel Blasting (red color coded) pressure washer spray nozzle with 4.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Blasting (red) QC spray nozzles have a powerful 0 degree pinpoint spray pattern for spot cleaning of hard, unpainted surfaces such as metal and concrete, or for high reach areas. They are ideal for removing weeds from sidewalk cracks, stubborn mineral stains and chewing gum from concrete, masonry, aluminum and steel, caked mud from equipment and cleaning lawn mower undersides. DO NOT USE Blasting QC spray nozzles on wood. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used.
As a general rule, QC spray nozzles with 4.0mm orifices work best on pressure washers rated between 500 PSI with 1.4 GPM (low end) to 8,000 PSI with 5.7 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 0? (Blasting)
Color-Coding: Red
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 4.0 mm
Maximum Temperature: 300? F (148.9? C)
Maximum Working Pressure: 4,000 PSI
View Details
$7.29
Quick Connect Flushing Nozzle, 25 Degrees x 4.0 mm, Green
Stainless steel Flushing (green color coded) pressure washer spray nozzle with 4.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Flushing (green) QC spray nozzles have a 25 degree spray pattern for standard cleaning for most applications, including yard tools, sidewalks, lawn furniture, unpainted siding, stucco, gutters and eaves, concrete, and brick surfaces. Ideal for sweeping leaves from walks, curbs and driveways, cleaning stable floors, washing swimming pool bottoms, cleaning barbecue grills, etc. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4.0mm orifices work best on pressure washers rated between 500 PSI with 1.4 GPM (low end) to 8,000 PSI with 5.7 GPM (high end). For pressure washers in-between the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. SPECIFICATIONS
Fitting: Spray nozzle
Material: Stainless steel
Spray Nozzle: 25? (Flushing)
Color-Coding: Green
Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
Orifice: 4.0 mm
Maximum Temperature: 300? F (148.9? C)
Maximum Working Pressure: 4,000 PSI
View Details
$7.29
